Mini Mac Chainsaw Manual

The Mini Mac Chainsaw is a compact, lightweight chainsaw designed for small cutting tasks, pruning, and light-duty woodworking. It features a powerful motor, safety chain brake, automatic oiler, low-kickback chain, ergonomic handle, and tool-free chain tensioning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Motor housing, Guide bar, Saw chain, Chain brake lever, Throttle trigger, Lock-off button, Front hand guard, Chain tensioning knob, Automatic oiler system.

Assembly & Setup

Unpack and inspect all parts. Assemble on a clean, flat surface.

1. Attach guide bar: Align bar with motor housing, secure with provided nuts.
2. Install chain: Place chain over bar, ensuring cutting teeth face forward.
3. Adjust tension: Use tensioning knob to set proper chain slack (check manual).
4. Fill oil reservoir: Use recommended bar and chain oil; do not overfill.
5. Charge battery (if applicable): Fully charge before first use.

WARNING! Always wear safety gear (gloves, goggles, ear protection) during assembly and use. Ensure chain is properly tensioned before operation.

Safety Instructions

Read all instructions before use. Failure to follow safety rules may cause serious injury.

1. Always wear protective equipment: safety glasses, gloves, hearing protection, sturdy footwear.
2. Keep hands away from cutting area and chain when operating.
3. Ensure work area is clear of bystanders, pets, and obstacles.
4. Do not operate in wet conditions or near flammable materials.
5. Use both hands to control saw; maintain firm footing.
6. Never cut above shoulder height or while on a ladder.
7. Engage chain brake when not actively cutting or when carrying saw.
8. Disconnect power/battery when not in use or during maintenance.

CAUTION! Kickback can occur if chain contacts object or binds. Always hold saw firmly and be prepared.

Specifications

• Model: Mini Mac Chainsaw (Electric/Battery)
• Guide Bar Length: 8 inches (standard), 10 inches (optional)
• Chain Pitch: 1/4 inch low-kickback chain
• Motor Power: 8-10 Amp (corded) or 20V Lithium-ion (battery)
• Weight: Approximately 4.5 lbs (without battery)
• Oil Capacity: 4.0 oz reservoir
• Noise Level: < 90 dB(A)
• Battery Runtime: Up to 30 minutes per charge (varies by use)
• Charge Time: 60 minutes (fast charger)
• Safety Features: Chain brake, lock-off button, hand guard, low-kickback chain

Controls and Components

Main Controls: Throttle trigger, Lock-off button, Chain brake lever, Tensioning knob, Oiler button (manual override).

Front Panel: Power switch (corded), Battery indicator (LED lights), Oil level window, Chain cover release.

Operation: Press lock-off button while squeezing throttle to start. Release throttle to stop chain. Engage chain brake by pushing lever forward. Adjust chain tension by turning knob clockwise (tighter) or counterclockwise (looser). Check oil level via window; refill when low.

Operation Guide

For cutting branches, pruning, light firewood.

1. Check chain tension and oil level before each use.
2. Hold saw firmly with both hands; thumb wrapped under handle.
3. Start cut at full throttle; let chain do the work without forcing.
4. For pruning: cut from underside of branch to avoid binding.
5. For bucking: support log properly; avoid cutting into ground.
6. After cutting, release throttle and engage chain brake.
7. Clean saw of debris and check chain for damage.

Tip: Keep chain sharp; dull chain requires more force and increases kickback risk.

Chain Maintenance

Regular maintenance ensures optimal performance and safety.

1. Sharpening: Use round file matching chain gauge; file at correct angle (usually 30°).
2. Tensioning: Chain should be snug against bar but pull freely by hand.
3. Lubrication: Use only recommended bar and chain oil; check reservoir frequently.
4. Cleaning: Remove sawdust from bar grooves and oil ports.
5. Inspection: Check for worn drive links, damaged cutters, or cracked bar.
6. Replacement: Replace chain when cutters are worn beyond sharpening or damaged.

WARNING! Always disconnect power/remove battery before performing maintenance. Wear gloves when handling chain.

Cleaning & Storage

Disconnect power/remove battery. Wipe exterior with dry cloth. Clean air vents to prevent overheating. Empty oil reservoir if storing long-term. Store in dry, cool place away from children.

CAUTION! Do not use water or solvents; avoid storing with fuel or flammable materials.

Warranty Information

Limited warranty: 2 years from date of purchase for defects in materials/workmanship. Warranty does not cover normal wear, misuse, or unauthorized repairs. For warranty service, contact customer support with proof of purchase. For support, visit www.minimacchainsaw.com or call 1-800-555-TOOL.

Troubleshooting

Reset: For electric models, unplug for 30 seconds to reset thermal overload.

Service: 1-800-555-TOOL; www.minimacchainsaw.com