Echo Electric Chainsaw Manual

The Echo Electric Chainsaw is a powerful corded electric chainsaw designed for residential cutting tasks, featuring a high-efficiency motor, automatic oiler system, low-kickback bar and chain, tool-free chain tensioning, safety chain brake, and ergonomic handles. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Electric motor, guide bar, cutting chain, automatic oiler, chain brake, front and rear handles, power cord.

Safety Information

Read all instructions before use. Always wear protective gear.

1. Personal Protective Equipment: Wear safety glasses, hearing protection, gloves, non-slip boots, and close-fitting clothing.
2. Work Area Safety: Clear area of bystanders, especially children. Ensure secure footing.
3. Electrical Safety: Use grounded outlet only. Keep cord away from cutting area and sharp objects.
4. Kickback Prevention: Hold saw firmly with both hands. Do not cut with tip of bar.

WARNING! Risk of serious injury or death. Never operate without proper training and safety gear. Keep hands away from chain.

Assembly & Setup

Unpack and inspect all parts. Assemble on a clean, flat surface.

1. Attach Guide Bar: Place bar onto mounting studs, align chain around bar and sprocket.
2. Install Chain: Ensure cutting teeth face forward on top of bar. Adjust tension.
3. Fill Oil Reservoir: Use recommended bar and chain oil. Check for leaks.
4. Connect Power: Plug into grounded 120V outlet. Test safety features before use.

CAUTION! Ensure chain is properly tensioned—snug but able to be pulled around bar by hand.

Specifications

• Motor Type: Brushless electric, 15 Amp.
• Bar Length: 14" or 16" (model dependent).
• Chain Pitch: 3/8" low-profile.
• Chain Gauge: 0.050".
• Oil Capacity: 6.8 fl oz (200 ml) reservoir.
• Weight: 10.8 lbs (4.9 kg) without cord.
• Sound Level: 95 dB(A) at operator's ear.
• Power Source: 120V AC, 60Hz, grounded outlet.
• Recommended Oil: Echo Bar & Chain Oil or equivalent.

Controls and Functions

Main Controls: Front Handle with safety trigger, Rear Handle with grip, Chain Brake lever, Oil Cap, Tensioning Knob.

Operation: Depress safety trigger, then squeeze main trigger to start. Release to stop. Engage chain brake by pushing lever forward.

Maintenance: Check oil level window, tensioning knob for adjustments, chain catcher, and bar mounting nuts.

Operation Instructions

Starting: Ensure chain brake is disengaged. Plug in. Hold saw firmly, press safety trigger, then main trigger.

1. Make a Cut: Let chain reach full speed before contacting wood. Use steady, even pressure.
2. Kickback Awareness: Never cut with upper tip. Be prepared to engage brake.
3. Oiling: Automatic system works when motor runs. Check oil level frequently.
4. Stopping: Release trigger. Engage chain brake when not cutting. Unplug for extended stops.

Tip: Plan cut to avoid pinching bar. Use wedges for large logs.

Maintenance & Cleaning

Regular maintenance ensures performance and safety. Always unplug before servicing.

1. Daily: Clean air vents, check chain tension, inspect bar for wear, refill oil.
2. Weekly: Clean saw body, check cord for damage, inspect sprocket.
3. Monthly: Lubricate bar tip sprocket, check brake function, tighten all fasteners.

CAUTION! Never use gasoline or solvents to clean plastic parts. Use damp cloth only.

Chain Sharpening & Replacement

Sharp chain improves cutting and safety. Replace when teeth are worn or damaged.

1. Sharpen: Use round file and guide. Maintain original angle (typically 30°). File each tooth equally.
2. Depth Gauges: File down after several sharpenings to prevent kickback.
3. Replace Chain: When cutting performance declines or damage occurs. Match pitch and gauge.
4. Replace Bar: If groove is worn unevenly or tip is damaged.

WARNING! Wear gloves when handling chain. Ensure saw is unplugged.

Storage Guidelines

Store in dry, secure location out of reach of children.

1. Clean saw thoroughly, removing sawdust and resin.
2. Drain oil reservoir or fill completely to prevent moisture.
3. Loosen chain tension to relieve pressure on bar.
4. Store with bar cover on. Hang or place on shelf.

CAUTION! Do not store near heat sources or flammable materials.

Warranty Information

Echo Electric Chainsaw includes a 2-year consumer warranty covering defects in materials and workmanship. Proof of purchase required. Warranty does not cover wear items (chain, bar, sprocket), misuse, neglect, or commercial use. For warranty service, contact authorized Echo dealer or call 1-800-432-ECHO (3246). Register product online at www.echo-usa.com.

Troubleshooting

Service: For repairs, use authorized Echo service center only. Do not attempt internal repairs.

Support: 1-800-432-ECHO; www.echo-usa.com