650EVL Chainsaw Owners Manual

The 650EVL Chainsaw is a professional-grade electric chainsaw featuring a 16-inch Oregon bar and chain, brushless motor technology, automatic oiling system, chain brake safety mechanism, tool-free chain tensioning, ergonomic rear handle design with anti-vibration, and a 12-amp motor powered by 120V AC. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Assembly & Setup 4. Specifications 5. Controls and Operation 6. Chain Maintenance 7. Cutting Techniques 8. Storage & Transport 9. Warranty Information 10. Troubleshooting

Features at a Glance

Key components: Brushless motor, 16-inch Oregon bar and chain, automatic oiler, chain brake, tool-free tensioning, rear handle design.

Feature	Description
Motor Type	12-amp brushless electric motor
Bar Length	16-inch Oregon guide bar
Chain Type	.325-inch pitch, 70-drive link Oregon chain
Oiling System	Automatic with manual override
Safety Features	Chain brake, hand guard, safety trigger
Tensioning System	Tool-free side adjustment
Power Source	120V AC, 60Hz
Weight	10.8 lbs (without cord)
Handle	Ergonomic rear handle with anti-vibration
Warranty	5-year limited warranty

Safety Information

Always wear proper safety equipment and follow safe operating procedures.

Personal Protective Equipment: Wear safety glasses, hearing protection, gloves, chainsaw chaps, and steel-toed boots.
Work Area Safety: Clear area of obstacles; ensure secure footing; keep bystanders at least 15 feet away.
Electrical Safety: Use grounded outlet; keep cord away from cutting area; inspect cord before use.
Chain Safety: Always engage chain brake when not cutting; ensure proper chain tension.

WARNING! Never operate chainsaw with one hand. Always maintain firm grip with both hands. Keep chain away from body.

Assembly & Setup

Unpack and inspect all components before assembly.

Attach guide bar: Place bar on mounting studs, align chain with sprocket, install bar nuts finger-tight.
Install chain: Place chain over bar with cutting teeth facing forward, engage drive links in sprocket.
Tension chain: Use tool-free tensioner to achieve proper tension (chain should snap back when pulled).
Fill oil reservoir: Use only chainsaw bar oil; fill to MAX line.
Connect power: Plug into grounded 120V outlet; test safety features before use.

CAUTION! Ensure chain is properly tensioned before operation. Loose chain can derail causing injury.

Specifications

Model: 650EVL Electric Chainsaw
Motor: 12-amp brushless, 120V AC
Bar Length: 16 inches
Chain Pitch: .325-inch
Chain Gauge: .050-inch
Drive Links: 70
Oil Capacity: 6.8 fl oz
Sound Level: 98 dB(A)
Weight: 10.8 lbs
Vibration: <2.5 m/s²
Cord Length: 10 feet

Controls and Operation

Main controls: Safety trigger, main trigger, chain brake lever, oiler button.

Starting Procedure:

Place chainsaw on flat surface.
Depress safety trigger with right hand.
Squeeze main trigger to start motor.
Release safety trigger to engage cutting mode.

Chain Brake: Push forward to engage; pull back to disengage. Test before each use.

Automatic Oiler: Delivers oil continuously during operation. Manual override available via oiler button.

Chain Maintenance

Regular maintenance ensures optimal performance and safety.

Chain Sharpening: Use 5/32-inch round file; maintain 30-degree angle; file all cutters evenly.
Chain Tension: Check every 15 minutes of use; adjust when chain sags more than 1/8 inch from bar.
Bar Maintenance: Clean bar groove weekly; flip bar monthly for even wear.
Oiling System: Check oil flow daily; clean oil ports weekly; use only recommended bar oil.

Tip: Keep chain sharp - dull chains require more force and increase kickback risk.

Cutting Techniques

Proper technique reduces fatigue and increases safety.

Felling Trees: Use notch and backcut method; plan escape path; never cut above shoulder height.
Limbing: Work from trunk outward; cut downward on top of limb; watch for springback.
Bucking: Support log properly; cut from top down; avoid cutting into ground.
Pruning: Use tip of bar for precision cuts; maintain secure footing.

WARNING! Beware of kickback zone (upper quadrant of bar tip). Never cut with this area.

Storage & Transport

Store chainsaw properly to extend lifespan.

Clean thoroughly after each use.
Empty oil reservoir for long-term storage.
Store chain loose to prevent stretching.
Use scabbard for bar protection during transport.
Store in dry location away from children.

CAUTION! Always disconnect power before storage or maintenance.

Warranty Information

5-year limited warranty covering defects in materials and workmanship. Warranty does not cover normal wear, misuse, improper maintenance, or commercial use. Register product within 30 days of purchase at www.echolimited.com/register. For warranty claims, contact customer service at 1-800-555-ECHO with proof of purchase.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Motor won't start	Power source, safety trigger	Check outlet; ensure safety trigger depressed; inspect cord.
Chain won't turn	Chain brake, tension	Disengage chain brake; check chain tension; inspect sprocket.
Poor cutting performance	Dull chain, improper tension	Sharpen chain; adjust tension; check bar groove.
Excessive vibration	Loose components, worn sprocket	Tighten all fasteners; replace worn sprocket.
Chain derails frequently	Improper tension, worn bar	Adjust tension; inspect bar for wear; replace if necessary.
No oil to chain	Empty reservoir, clogged ports	Fill oil reservoir; clean oil ports; check pump operation.

Service: Authorized service centers listed at www.echolimited.com/service. Customer support: 1-800-555-ECHO.