Earthwise Pole Chainsaw Manual

The Earthwise Pole Chainsaw is a lightweight, electric pole saw designed for safe and efficient pruning and trimming of tree branches. It features an extendable pole for reaching high branches, a low-noise electric motor, automatic oiler system, safety chain brake, and ergonomic handles. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Electric motor, extendable aluminum pole, Oregon® guide bar and chain, automatic oiler, safety chain brake, rear handle with trigger, auxiliary handle.

Safety Instructions

Read all instructions before use. Wear appropriate safety gear.

1. Personal Protective Equipment: Always wear safety glasses, gloves, hearing protection, and non-slip footwear.
2. Work Area Safety: Keep bystanders and pets at least 15 feet away. Ensure stable footing.
3. Electrical Safety: Use grounded outlet only. Keep cord away from cutting area. Do not use in wet conditions.
4. Kickback Awareness: Be aware of kickback zone (upper quadrant of guide bar tip). Do not let tip contact objects.
5. Pre-Operation Check: Inspect chain tension, sharpness, and bar condition before each use.

WARNING! Risk of serious injury or death. Do not operate above shoulder height. Never use on a ladder or unstable surface.

Assembly & Setup

Unpack all parts. Assemble on a clean, flat surface.

1. Attach Pole Sections: Align sections and twist clockwise until they click and lock.
2. Install Guide Bar & Chain: Place chain over bar sprocket, align bar with mounting studs, tighten nuts finger-tight, then use wrench to secure.
3. Adjust Chain Tension: Loosen bar nuts, turn tensioning screw until chain is snug against bar (able to be pulled by hand), retighten nuts.
4. Fill Oil Tank: Use only bar and chain oil. Fill to MAX line. Check for leaks.
5. Connect Power: Plug into 120V grounded outlet. Ensure cord is secure in retainer.

CAUTION! Ensure all connections are tight before operation. Do not force parts during assembly.

Specifications

• Model: Earthwise CPS60016
• Motor: 8 Amp, 120V AC, 60Hz
• Guide Bar Length: 8 inches
• Chain Pitch: 1/4-inch low-kickback
• Pole Length: Extends from 6 ft to 10 ft
• Oil Tank Capacity: 4.0 fl oz
• Weight: 7.5 lbs (without extension)
• Sound Level: < 90 dB(A)
• Recommended Oil: Earthwise Bar & Chain Oil or equivalent
• Warranty: 2-year limited warranty

Controls and Operation

Rear Handle: Trigger with lock-off button. Auxiliary Handle: Rotates 180° for comfortable positioning.

Starting Procedure:

1. Check oil level and chain tension.
2. Place saw on ground, ensure chain is clear of objects.
3. Press and hold lock-off button, then squeeze trigger.
4. Allow chain to reach full speed before cutting.

Cutting Techniques:

• Use lower quadrant of bar for cutting.
• Let the saw do the work; do not force.
• For branches >3 inches, make relief cut first.
• Always cut at waist level or below.

Stopping: Release trigger. Chain brake may be engaged manually by pushing handle forward.

Maintenance & Cleaning

Unplug after each use. Allow to cool before maintenance.

1. Clean Exterior: Wipe with dry cloth. Remove sawdust from motor vents and oil tank area.
2. Check Chain & Bar: Clean bar grooves with wire brush. Ensure oil holes are clear.
3. Inspect Power Cord: Look for cuts or frays. Replace if damaged.
4. Lubrication: Refill oil tank before each use. Use only recommended oil.

CAUTION! Never use water or solvents to clean motor. Store in dry place.

Chain Sharpening & Tensioning

Sharp chain improves performance and safety.

1. Tensioning: Chain should be snug but pull freely by hand. Adjust tension screw when chain is cool.
2. Sharpening: Use 5/32" round file and file guide. Maintain 30° angle. File each cutter evenly.
3. Depth Gauges: Check after several sharpenings. Use flat file to maintain 0.025" below cutter.
4. Replacement: Replace chain when cutters are worn beyond repair or damaged.

Tip: Keep spare chains on hand. Always wear gloves when handling chain.

Storage Guidelines

Store in dry, secure location out of reach of children.

1. Clean thoroughly before storage.
2. Empty oil tank or fill completely to prevent moisture buildup.
3. Loosen chain tension to prolong bar and chain life.
4. Store in original box or protective cover.
5. Keep away from extreme temperatures and direct sunlight.

WARNING! Do not store with fuel-powered equipment. Ensure trigger is locked.

Warranty Information

Earthwise provides a 2-year limited warranty from date of purchase against defects in materials and workmanship. Warranty does not cover normal wear, misuse, or unauthorized repairs. Proof of purchase required. For warranty service, contact Earthwise Customer Service at 1-800-XXX-XXXX or visit www.earthwiseproducts.com.

Troubleshooting

Service: For repairs not covered under warranty, contact authorized service center. Do not attempt to repair motor yourself.

Support: 1-800-XXX-XXXX; www.earthwiseproducts.com