Eager Beaver 16 Electric Chainsaw Manual

The Eager Beaver 16 Electric Chainsaw is a lightweight, user-friendly chainsaw designed for home and garden use. It features a 16-inch guide bar, powerful electric motor, automatic oiler, low-kickback chain, tool-free chain tensioning, and safety features including a chain brake and hand guard. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Electric motor, 16-inch guide bar, automatic oiling system, safety chain brake, front hand guard, tool-free chain tensioner.

Safety Instructions

Read all instructions before use. Wear appropriate safety gear.

1. Always wear safety glasses, gloves, ear protection, and sturdy footwear.
2. Keep hands away from cutting area and chain when operating.
3. Ensure work area is clear of obstacles and bystanders.
4. Use both hands to operate chainsaw; maintain secure footing.
5. Do not operate in wet conditions or with damaged power cord.

WARNING! Risk of serious injury or death. Never operate without proper safety equipment. Keep children and pets away.

Assembly & Setup

Unpack and inspect all parts. Assemble on a clean, flat surface.

1. Attach guide bar: Align bar with mounting studs and secure with nuts.
2. Install chain: Place chain around bar, ensuring cutting teeth face forward.
3. Adjust tension: Use tool-free tensioner to achieve proper chain tightness.
4. Fill oil reservoir: Use recommended bar and chain oil; check level window.
5. Plug into power: Use grounded 120V outlet; ensure cord is undamaged.

CAUTION! Ensure chain is properly tensioned before use. Loose chain can derail or cause injury.

Specifications

• Model: Eager Beaver 16 Electric Chainsaw.
• Motor: 12-amp, 120V AC, 60Hz.
• Guide Bar Length: 16 inches.
• Chain Pitch: 3/8 inch low-kickback.
• Oil Capacity: 6.8 fl oz (200 ml) reservoir.
• Weight: 8.8 lbs (4 kg) without cord.
• Cord Length: 6 ft (1.8 m) power cord.
• Safety Features: Chain brake, hand guard, safety lock trigger.
• Recommended Use: Pruning, limbing, cutting firewood, general yard work.

Controls and Components

Main components: Front hand guard, rear handle with trigger, chain brake lever, oil filler cap, tension adjustment knob.

Controls: Power trigger with safety lock, chain brake lever (front), automatic oiler, tension adjustment knob.

Operation: Press safety lock and squeeze trigger to start. Release trigger to stop. Engage chain brake by pushing hand guard forward. Adjust chain tension via knob near guide bar. Check oil level through window.

Operation Guide

For cutting logs, branches, and firewood.

1. Check chain tension and oil level before each use.
2. Clear work area of debris and ensure secure footing.
3. Hold saw firmly with both hands; thumb wrapped under handle.
4. Start cut at full speed; let chain do the work without forcing.
5. Use lower part of bar for cutting; avoid tip to prevent kickback.
6. For large logs, cut from top and bottom to avoid pinching.
7. After cutting, allow chain to stop before setting saw down.

Tip: Plan cuts to avoid contact with ground, which dulls chain quickly.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and safety.

1. Clean air vents after each use to prevent motor overheating.
2. Wipe exterior with dry cloth; remove sawdust and debris.
3. Check chain tension frequently; adjust as needed.
4. Inspect guide bar for wear; rotate bar periodically for even wear.
5. Lubricate sprocket tip with grease as recommended.

WARNING! Unplug chainsaw before performing any maintenance. Never clean with water or solvents.

Chain Sharpening & Replacement

Sharp chain improves cutting efficiency and safety.

1. Sharpen chain regularly with round file matching chain pitch.
2. File each cutter at same angle (typically 30 degrees).
3. Maintain consistent file depth; check depth gauges.
4. Replace chain when cutters are worn beyond sharpening or damaged.
5. Install new chain following assembly instructions.

CAUTION! Wear gloves when handling chain. Ensure chain is correctly installed and tensioned.

Storage Guidelines

Store in dry, secure location away from children.

Clean saw thoroughly before storage. Empty oil reservoir or use stabilizer. Store chain loose to relieve tension on bar. Cover saw to prevent dust accumulation. Hang by rear handle or place on shelf.

CAUTION! Do not store with fuel (if applicable) in living areas. Keep away from heat sources.

Warranty Information

Limited warranty: 2 years from date of purchase for defects in materials/workmanship. Proof of purchase required. Warranty does not cover normal wear, misuse, or unauthorized repairs. For warranty service, contact Eager Beaver customer support at 1-800-555-1234 or visit www.eagerbeavertools.com.

Troubleshooting

Service: For repairs not covered under warranty, contact authorized service center.

Support: 1-800-555-1234; www.eagerbeavertools.com